Incarcare... Asteptati...

Cautati un produs

anume si nu l-ati gasit pe site?


Adresa de e-mail*:

Numar de telefon*:



Cisco Unified IP Phone 7960G

75 EUR(fara TVA)
Cod produs:
1.60 KGS
12 luni
TL 10 zile
Bookmark and Share

Descriere produs

  • CP-7960G + CP-PWR-CUBE-3 inlcuded

Cisco Unified IP Phone 7960G features:

●   24+ user-adjustable ring tones

●   A hearing-aid-compatible handset (meets American Disabilities Act [ADA] requirements) and HAC compliance for magnetic coupling to approved HAC hearing aids

●   G.711 and G.729a audio compression

●   H.323 compatible and Microsoft NetMeeting compatibility

●   An IP address assignment - DHCP client or statically configured

●   Comfort noise generation and voice activity detection (VAD) programming on a system basis

●   EIA/TIA RS-232 port for future add-on options such as line expansion, security access, and more

Phone settings:

●   Display contrast

●   Ring type

●   Network configuration

●   Call status


●   Download firmware changes from Cisco CallManager and CCO

●   Dimensions: 82 x 10.5 x 6 in. (20.32 x 26.67 x 15.24 cm) (H x W x D)

●   Phone weight: 3.5 lb (1.6 kg)

●   Polycarbonate acrylonitrile butadiene styerene (ABS) plastic in textured dark gray color with silver bezel

●   48 VDC required, supplied locally at the desktop using an optional AC to DC power supply (CP-PWR-CUBE-3=)

The following cables are required to connect the Cisco IP Phone 7960G:

• RJ-11 for the handset connection.

• RJ-45 jack for the LAN connection (labeled “10/100 SW”).

• RJ-45 jack for a second 10BASE-T compliant connection (labeled “10/100 PC”).

• 48-volt power connector. The diameter of the center pin in the phone power jack (Switchcraft 712A) 

is 0.1 in (2.5 mm). The center pin is positive (+) voltage. The miniature power plug required to mate 

with the power jack on the phone is a Switchcraft 760 or equivalent.

Connection Specifications:

The Cisco IP Phone 7960G has two RJ-45 ports that each support 10/100 Mbps half- or full-duplex connections to external devices—the network port and the access port. You can use either Category 3 or Category 5 cabling for 10-Mpbs connections, but use Category 5 for 100-Mbps connections. On both the LAN-to-phone port (left RJ-45 port facing the back of the phone) and the PC-to-phone port (right port), use full-duplex to avoid collisions. Use the LAN-to-phone port to connect the phone to the network. Use the PC-to-phone port to connect a network device, such as a computer, to the phone.


  • 100 to 240 VAC, 50 to 60 Hz, 0.5 A—when using the AC adapter.
  • 48 VDC, 0.2 A—when using the in-line power over the network cable.

Scrie propriul comentariu

Comentarii produse

Fii primul care comenteaza acest produs!

Ultimele vizionate...


Din Euro in RON:

Cosul meu

Total comanda: 0 EUR(fara TVA)

Ai 0 produse in cos.

Vezi cosul